| Study on the surface modification of UHMWPE fiber with MWNTs |
| 關鍵詞： |
MWNTs/UHMWPE fiber surface modification mechanical properties thermal properties adhesive proper |
| 類 別： |
纖維 >> 合成纖維 |
| 來 源： |
ICAFPM 2011 |
| 資料類型： |
pdf文件 |
| 資料大?。?/td>
| 3071K |
| 簡 介： |
In this paper, using multi-walled carbon nanotubes (MWNTs) as surface modifiers, the modified ultra high molecular weight polyethylene (UHMWPE) fibers were made after the gel fiber extracted with the MWNTs/xylene compound extracting agent and followed by drying and multi-stage hot drawing. The surface morphological structure and thermal properties of pure UHMWPE fiber and MWNTs/UHMWPE fibers were characterized with scanning electron microscope (SEM), thermogravimetry (TG) analysis and differential scanning calorimeter (DSC). The mechanical and adhesive properties of MWNTs/UHMWPE fibers were measured and compared with pure UHMWPE fiber. The results showed that the MWNTs were introduced into the surface of UHMWPE fiber after the extracting treatment. The fiber’s melting temperature and its decomposing temperature at 5% weight loss increased from 144.6℃ to 144.8℃ and 430.5℃ to 450.1℃, respectively. The tensile strength of the fiber increased a little after MWNTs modification, the interfacial shear strength (IFSS) between the modified fiber and epoxy matrix increased by 48.3%. |
| 上傳人： |
epce |
| 上傳時間： |
2011-09-29 16:05:03 |
| 下載次數： |
8 |
| 消耗積分： |
4 |
| 我要收藏： |
 |
| |
友情提示：下載后對該資源進行評論，即可獎勵2分。 |
|
本欄目部分資源來自互聯網，僅為促進數據共享和信息交流，如有版權問題請告知本網或上傳者本人，本網會及時給予答復。 |
| 報告錯誤
1.下載無效
2. 資料明顯無價值
3. 資料重復存在
|
